Our professional inspection and certification services.
Service offered: mobile inspection at your sites throughout Quebec
Insulating gloves
Insulating glove tests are performed in accordance with ASTM D120, ASTM F496 and CSA Z462 standards.
Inspection procedure:
A complete visual inspection of each glove
Dielectric tests according to class (00 to 4)
Test date stamping
Ranking by pair, by class and by length
Sealed bagging to ensure safety and traceability
Clear identification of non-conforming items
Issuance of a detailed dielectric report
Delivery of the gloves directly to your site
Insulating poles
Service offered: Mobile inspection directly at your garages, warehouses, or construction sites. Recommended frequency: Annually. Standards: ASTM-F711, ASTM-F1826
Inspection procedure:
Visual inspection (cracks, contamination, wear)
Mechanical inspection (wipers, mechanisms, seals)
Dielectric tests along the entire length
Cleaning of insulating material
Labeling with the inspection date
Identification of non-compliant poles
Full Dielectric Ratio
Handover on site immediately
Insulating poles
Service offered: Mobile inspection directly at your garages, warehouses, or construction sites. Recommended frequency: Annually. Standards: ASTM-F711, ASTM-F1826
Safety harnesses, lanyards and DAR
Service offered: Mobile inspection at your location. Recommended frequency: Annually or according to your internal standards. Standards: CSA-Z259
Inspection procedure:
Visual inspection of straps, seams, D-rings and connectors
Checking the loops, adjustments, carabiners and shock absorbers
Inspection of lanyards (wear, abrasions, seams and connectors)
Inspection of self-retracting devices (SRDs): locking mechanism, cable unwinding and return, condition of the cable and housing.
.jpg)
OUR INSPECTION SERVICES ACCORDING TO ASTM AND CSA STANDARDS
-
Visual inspection and dielectric testing of insulating gloves
(ASTM D120, CSA C22.2 No. 23) -
Verification and testing of insulating sleeves, mats, and blankets
(ASTM F711, CSA C22.2 No. 198.1) -
Periodic compliance checks and maintenance
(ASTM F496) -
Certification and recommendations for reconditioning or replacement
-
Personalized guidance based on CSA Z462 – Electrical Safety in the Workplace
Insulating Mats
Applicable Standards:
-
ASTM F855
Standard for cables, clamps, conductors, and connectors used for temporary grounding of energized distribution and transmission lines. -
CSA Z462
Canadian standard requiring the use of compliant grounding devices when working in electrically hazardous environments.
✅ Inspection performed:
-
Thorough visual inspection before each use (checking for corrosion, mechanical damage, or wear)
-
Annual formal testing of electrical continuity and conductor integrity
-
Verification of clamps and connections to ensure effective and safe grounding
📌 Recommended frequency:
▪️ Visual inspection before every use
▪️ Complete inspection annually
.jpg)
Driver's cover
Service offered: Mobile inspection directly on your sites throughout Quebec
Recommended frequency: Annually or according to the intensity of use
Standards: ASTM-F478, ASTM-F479 (depending on the type of conductor cover)
Inspection procedure:
Complete visual inspection: cracks, cuts, perforations, abnormal rigidity, contamination
Mechanical integrity check:
Extremities
Interlocking or locking system
Material flexibility
Cleaning insulating materials with non-conductive products
Dielectric testing if required, depending on the category and the customer's use
Classification by type, length and category
Immediate identification of non-conforming items
Affixing a label indicating conformity and inspection date
Issuance of a detailed traceability report
Handover to the client on-site at the end of the inspection
Driver's cover
Service offered: Mobile inspection directly on your sites throughout Quebec
Recommended frequency: Annually or according to the intensity of use
Standards: ASTM-F478, ASTM-F479 (depending on the type of conductor cover)
Inspection procedure:
Complete visual inspection: cracks, cuts, perforations, abnormal rigidity, contamination
Mechanical integrity check:
Extremities
Interlocking or locking system
Material flexibility
Cleaning insulating materials with non-conductive products
Dielectric testing if required, depending on the category and the customer's use
Classification by type, length and category
Immediate identification of non-conforming items
Affixing a label indicating conformity and inspection date
Issuance of a detailed traceability report
Handover to the client on-site at the end of the inspection
Driver covers
Service offered: Mobile dielectric inspection throughout Quebec
Recommended frequency: Annually (depending on usage and employer requirements)
Standards: ASTM F478 / ASTM F479
Applicable Standards:
-
ASTM F855
Standard for cables, clamps, conductors, and connectors used for temporary grounding of energized distribution and transmission lines. -
CSA Z462
Canadian standard requiring the use of compliant grounding devices when working in electrically hazardous environments.
✅ Inspection performed:
-
Thorough visual inspection before each use (checking for corrosion, mechanical damage, or wear)
-
Annual formal testing of electrical continuity and conductor integrity
-
Verification of clamps and connections to ensure effective and safe grounding
📌 Recommended frequency:
▪️ Visual inspection before every use
▪️ Complete inspection annually
Procédure d’inspection :
-
Inspection visuelle (coupures, fissures, perforations)
-
Mesure de l’épaisseur et conformité des marquages
-
Essais diélectriques selon la classe du tapis
-
Identification des tapis non conformes
-
Rapport d’inspection complet
-
Remise sur place du matériel
Mobile Laboratory – Inspection across Canada
Our mobile lab travels across Canada to inspect, test, and certify your dielectric equipment directly on your site. Save time and ensure your team's safety with our fast, ASTM- and IEC-compliant service. 🚛⚡✅
Specialized testing solutions to ensure the safety, performance and compliance of your equipment.
Platforms and platforms
Service offered: Mobile inspection directly at your garages or job sites. Recommended frequency: Annual. Standards: CSA-C225:20
Inspection procedure:
Visual inspection of the isolated section
Cleaning the insulating boom before the test
Dielectric tests (AC or DC as specified)
General electrical check
Affixing the compliance label
Identification of non-conformities